KEP-300 Vertical Platform Lift
We are excited to announce the introduction of the KEP-300 to our product range!
"Silence and reliability - this is what the KEP-300 is offering." David Hobbs - Director of KEP Lifts
Some technical features, that makes our KEP-300 so silent:
Patented lifting system that works especially quiet
There is no vibration – rubber rollers and belts eliminates any possible vibration
Guide rollers made from rubber – it absorbs sounds during platform movement
Lifting gear based on belts. Belts made of steel ropes and rubber
2 x 100mm belts width
Motor and gearbox made special for this type of lift
Guide rails made from aluminium
Patented safety locking system
Soft start/stop function – our unique’s software result
Additional information
Design
The operation principle of KEP-300 is based on the double belt system. The engine is mounted on the top of the guides and rotates a belts, this way lifting the platform. The shaft is constructed on the basis of an anodised aluminium frame interconnected with the panels of a client’s choice. Multi-layered sandwich panels and laminated glass panels come as a standard. A maximum of three doors may be installed on each floor with either left or right swing. The doors on the top floor stop may be designed in the form of gates. This type of construction looks aesthetic and modern and gives a clear view of the surroundings. At the request of the client, the platform and panels may be painted in any RAL scale colour. KEP-300 is a standard colour RAL9006 (white aluminium).
Application
AB300 is designed for a comfortable use by all categories of passengers, including the elderly and people with limited mobility. Our platform lift fits perfectly both in the interior of buildings, and in a variety of external architectural styles even, in some cases, improving the aesthetics of buildings. In the case of internal installation, KEP-300 has all the essential qualities of a platform lift: minimum overall dimensions, no pit and machine room, silent operation and low energy consumption. KEP-300 may be installed in libraries, museums, hospitals, schools, airports, railway stations, above ground and underground passages or parking. Our lifts are widely used in private houses, cottages and apartment buildings. KEP-300 is durable and unpretentious in service, adaptable to different standards of power sources and can withstand large power surges.
Comfort
The absence of the lift cabin in KEP-300 lets us make a spacious and light platform. A standard platform (1,485 x 1,070 mm) ensures a comfortable journey for a person with a wheelchair and his attendant. The control of the platform is very simple and intuitive, with a stable system to incorrect commands or its consequences. A passenger may stop and resume the movement at any time of the trip and even change the lift’s moving direction. The beginning and the ending of the lifting process are performed in very smooth easing algorithms and don’t evoke any uncomfortable feelings for sensitive people. A uniformly back light control panel, with a comfortable handle below, contains large buttons with embossed symbols at a convenient height for access from sitting or standing positions.
LED lighting
We use the latest LED technology for the lighting of KEP-300 as it is cost-effective, durable and has a wide palette range. The sets of a large number of LED elements provide uniform illumination and an excellent aesthetic appearance. Energy saving LED lighting may stay on for a long time even in case of an emergency power failure. A backup battery installed on the platform may keep the necessary level of lighting for a couple of hours. Concept lift KEP-300
Anti-slip floor surface
The platform floor cover is made of rough anti-skid material, which is highly adhesive and abrasion resistant. The floor coating material may contain logos, promotional materials or pictures according to our clients’ needs.
Innovation
The vertical platform lift KEP-300 combines time-tested design solutions and new approaches to electronic control and fault diagnosis. By using the highest quality materials and components, our task is to increase the longevity of the lift and to minimise the downtime associated with troubleshooting and maintenance. The elevator control system can be equipped with a special diagnostic module that provides the detailed information on the status of all platform nodes and system sensors. The module informs about the usage of KEP-300, including the number of lifts and trip distances. It also enables the performing and adjustments of the lift operating settings, including speed and smoothness, the height of stops, lock closing time, button modes and much more.
Cost efficiency
The maximum efficiency of KEP-300 is achieved by using lighter materials, power saving lighting technologies and selecting a specific electric drive. The electric drive of the lift is constructed on the basis of an electronic frequency converter, which has the best characteristics of power consumption compared to directly connected motors, and enables the adjustment of the speed and smoothness of movement. KEP-300 lifts come with either a three-phase or single-phase frequency converter, depending on the capabilities of the present electrical circuit and intensiveness of lift usage. The frequency converter always provides the engine with the most optimal energy supply and prevents any energy wastage at the same time adapting to the grid voltage drops.
Security
The product reliability is the feature which is beneficial to both consumers and manufacturers. Long-term testing has shown that even after 50,000 cycles and more than 600,000 meters of travel the amortisation of the main gear was hardly recognisable. The control system of KEP-300 lift has passed stringent tests on the impact of the strong external electrical interference and received a certificate of electromagnetic compatibility (EMC). Technical maintenance service performed a general analysis on the lift design and its schematic solutions, in order to identify any possible weaknesses in security, and came to the conclusion that all measures are fully implemented, confirming the certificate of conformity. The security measures implemented in the KEP-300, comply with one of the most stringent European standard EN81-41: 2010. SB-200 always stops at an exact indicated position thanks to the triple braking torque system:
Electro-mechanical brake inside the motor
Electro-mechanical brake on the guides, executed by patented technology.
In case of emergency situations the lift mechanism is supplied with a manual emergency descent. Optionally, the emergency lowering mechanism may be actuated by an electric motor with a backup battery.
Technical Specifications
Drive system: 2x Belt drive
Nominal load: 400 kg / 5 persons
Lifting speed: 0.15 m/sec (9 m/min)
Lifting height: Up to 8 meters
Number of stops (floors): Up to 5
Platform dimensions: (length x width, mm)
*other dimensions available
1100 x 1400
1070 x 1485
1150 x 1485
Shaft dimensions: (length x widths, mm)
1500 x 1460
1460 x 1540
1540 x 1540
Dimensions of the doors: (width x height, mm)
*other dimensions available
900 x 2000 (when platform is 1100 x 1400)
940 x 2000
Dimensions of the gate: (width x height, mm)
900 x 1300 (when platform is 1100 x 1400)
940 x 1300
Configuration of the doors: Opens from left or right side, up to 3 doors per floor.
Shaft walls: Steel or tempered glass panels.
Standard colours:
*the lift can be painted in any RAL colorRAL 9010 (pure white) (for special price)
RAL 9006 (light grey aluminium)
Soft START/STOP: Standard equipment
Power supply: 220-230 V, 1 Ph, 25A
380-400 V 3 Ph, 16A, 50 or 60 HzEngine2.2 kW
Noise level: Less than 70 dB
Control system: Micro controller
Safety equipment: Protective edge around the platform, emergency braking buttons inside the platform and in the shaft, emergency stop switches, electronic speed control, overload detectors, door opening and lock control, belt tier sensors, electronic engine management
Conformity of the European Standard EN81-41: 2010
*For other dimensions please contact our consultant.
